Fiber Laser Pipe Cutting Machine

With the pursuit of high-end taste life, exquisite and atmospheric lighting has become the first choice for decorating the house. Especially for those who care more about private space, a beautiful and full of dreamy lighting can make you feel bigger inside. Sublimation, especially metal lighting products, is more style.

A good metal lighting product requires a lot of complicated processes to complete, especially large metal lighting is not only complicated in process but also long in production cycle. In order to save production cycle and improve production efficiency, the introduction of high efficiency and high precision It is necessary to reduce the number of machining equipment, and the application of fiber laser cutting machine in metal lighting manufacturing is a natural fit.

The fiber laser cutting machine adopts mobile laser cutting, and the processing width is large. The negative pressure crawler type working platform is equipped with left and right feeding and receiving devices, which enables the discharging, cutting and receiving materials to be completed in one go, greatly reducing the time between processes and improving. With the work efficiency and processing output, it can automatically realize the pipe processing equipment of pipe from loading, length measurement to laser cutting, and then all the actions and functions of cutting.

When the cutting gas is ejected, the gas volume is not uniform, which makes the cutting section more prone to the phenomenon of melting on one side and not on the other. It has less influence on the cutting of thin plates below 3mm. When cutting the plates above 3mm, its influence is more serious, sometimes it will cause the failure to cut. Affecting the quality of sharp angle, it is easy to produce local overmelting when cutting work with sharp angle or small angle. When cutting thick plate, it may not be able to cut. Influencing perforation is unstable and time is not easy to control. The penetration of thick plates will result in overmelting, and the penetration conditions are not easy to grasp, which has little influence on the perforation of thin plates.

Therefore, the bigger the nozzle aperture is, the worse the protection of the focusing lens is. Because the spark of the melt splashes during cutting, the higher the probability of projection, the shorter the life of the lens. The concentricity of the nozzle center and the laser is one of the important factors that affect the cutting quality, especially when the cutting workpiece is thicker. Therefore, it is necessary to adjust the concentricity of the nozzle center and laser in order to obtain better cutting section.

Note: When the nozzle is deformed or there is melting on the nozzle, its influence on the cutting quality is the same as described above. Therefore, the nozzle should be placed carefully and should not be damaged to avoid deformation; the melt stain on the nozzle should be cleaned up in time. . The quality of the nozzles is highly accurate when manufactured and requires the correct method of installation. If the conditions are changed during cutting due to poor nozzle quality, the nozzle should be replaced in time.

Metal lighting products, except for bulbs, are mostly made of metal tubes. In addition to simple processes such as opening and cutting, the metal holes are also subjected to complicated processes such as engraving and chamfering. Before the manufacture of such lighting requires a cast semi-manual pipe cutting machine, it also requires a skilled craftsman to manually cut and process rough-processed parts, thus wasting a lot of time and labor costs.

Fiber laser cutting machine is used in the manufacture of metal lighting. In addition to reducing part of the manpower, it can also be used for engraving and beveling in processing and production. The most important thing is that the tube processed by the fiber laser cutting machine does not need to be processed. After the secondary treatment, these parts can be directly used in the next process, which saves a lot of useless work. Fiber laser cutting machine is a relatively large investment for some small manufacturers. However, it can work for several people, can work 24 hours a day, and can complete cutting requirements with high efficiency and high precision. Counting it is an account worthy of long-term investment.

With the continuous expansion of laser application industry, its functions become more and more powerful. For the application of optical fiber laser pipe cutter in metal lighting manufacturing, it shows that laser equipment has been deeply cultivated in furniture industry, and laser equipment will contribute its own light to more industries.